Hardware features

• Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
• Memory: 64MB DDR2 RAM, 8MB Flash
• Interface: 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1 Grounding Terminal, 1 Reset Button
• Power Supply: Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins), Voltage range: 16-27VDC
• Power Consumption: 5 Watts Max. Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
• Dimensions ( W x D x H ): 224 x 79 x 60 mm
• Antenna Type: Built-in 9dBi 2x2 Dual-polarized Directional Antenna. Beam Width: 65° (H-Plane) / 40° (E-Plane)
• Protection: 15KV ESD Protection, 6KV Lightning Protection
• Enclosure: Outdoor ASA stabilized plastic material, IPX5 waterproof Certification

Wireless Features

• Wireless Standards: IEEE 802.11b/g/n (with Pharos MAXtream disabled)
• Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
• Wireless Speeds:
  • Up to 300Mbps (40MHz,Dynamic)
  • Up to 144.4Mbps (20MHz,Dynamic)
  • Up to 72.2Mbps (10MHz,Dynamic)
  • Up to 36.1Mbps (5MHz,Dynamic)

• Frequency: 2.4~2.483GHz Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
• Transmission Power: 25dBm/316mw (Adjustable power by 1dBm) Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.

Software Features

• Wireless Configurations: Pharos MAXtream TDMA Technology, 802.11b/g/n Modes, Selectable Channel Width: 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP), Encryption, 64/128/152-bit WEP Encryption, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter, Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation, >Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
• Management: Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, ,System Log, SNMP Agent(v2c), Ping Watch Dog, Dynamic DDNS, SSH Server
• System Tools: Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory. Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP.  Spectrum Analyzer, Speed Test, Ping, Traceroute
• System-level Optimizations: Optimized IGMP Snooping/Proxy for multicast applications, Hardware watch dog

POE Adapter Feautres

• Dimensions(W x D x H): 85.8×43.9×29.7 mm
• Interfaces: 1 AC Jack with Earth Ground, 1 10/100Mbps Shielded Ethernet Port (Power + Data), 1 10/100Mbps Shielded Ethernet Port (Data)
• Button: Remote Reset Button
• Power Status LEDs: Green
• Input: 100-240VAC, 50/60Hz
• Output:  V2.0: 24VDC, 0.6A Max,  V3.0: 24VDC, 0.5A Max,  V3.20: 24VDC, 0.25A Max, +4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
• Efficiency: >80%
• Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

Others

• Certification: CE, FCC, RoHS, IPX5
• System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
• Environment:
  • Operating Temperature: -40℃~70℃ (-40℉~158℉)
  • Storage Temperature: -40℃~70℃ (-40℉~158℉)
  • Operating Humidity: 10%~90% non-condensing
  • Storage Humidity: 5%~95% non-condensing

Limited 3-Year Warranty

Download brochure for TP-Link TP-Link CPE210 Outdoor Wireless Access Point