About Public Address Amplifier (PA) 125W 4 Input

This 125 Watt 4 channel mixer amplifier is specifically designed for applications requiring up to three microphone inputs, without compromising output power and overall performance. The amplifier features three inputs which can be configured for either microphone or line level operation. The amplifier conservatively delivers 125W RMS power. Frequency response extends from 50Hz to 15kHz ±3dB at a total harmonic distortion (THD) of less than 0.5% @ 1kHz.

Vox muting is provided on inputs one and two, which, when activated, automatically mutes the other inputs. Bass and treble controls and phantom powering capability enable unparalleled exibility for a wide scope of applications such as factories, workshops, mine sites, sports clubs and of ce buildings. The amplifier operates from 240V AC mains or 24V DC permitting battery backup operation during mains power failure. The output comes standard suitable for a 100V line load, but this can be configured internally to 70V line or low impedance (4 - 16Ω) loads.

Thermal overload, overcurrent and overload protection circuitry and fuses on both AC and DC provide excellent fault condition protection and robust performance. The amplifier also utilises a half power mode which enables the amplifier to continue to run at a reduced output level if it is being over driven. Tape output sockets are provided for recording purposes or feeding into additional power amplifiers.

Remote volume available when A 4373 Digital volume control module fitted internally and external A 2280B wall plate or 1KΩ potentiometer connected. Alert and Evacuation tones (conforming to AS1607.4) along with chime tones and voice over message option available when optional A 4573 fitted.

Suitable for 19″ rack mounting with use of A4376 rack mount ears.


  • 3 Balanced microphone inputs / 3 Aux inputs / 1 Music input
  • Robust design incorporating latest Mosfet technology
  • Very Low noise and distortion
  • 100V standard with optional 70V and 4-16Ω outputs
  • 240V AC or 24V DC operation
  • VOX muting on inputs 1 and 2 (Switch selectable internally)
  • Adjustable VOX level sensitivities
  • Bass and Treble controls
  • Tape Output
  • Phantom power on microphone inputs (DIP switch selectable internally)
  • Multi stage thermally cued fan cooling
  • Output Peak Limited
  • Thermal Overload protected
  • Signal Presence Indicator
  • Half power mode when overdriven
  • Fault Indicators
  • 24V DC Power Status Indicator
  • Optional Alert/Evac module with voice over message for emergency tones (A 4573)
  • Optional remote volume (With A 4373 Digital volume control module fitted and external A 2280B wall plate)
  • Rack Mountable (suits 19 inch racks) with optional A 4376 rack ears
SKU A4377
MPN A4377
Shipping Weight 6.0000kg
Shipping Width 0.400m
Shipping Height 0.150m
Shipping Length 0.400m
Shipping Cubic 0.024000000m3
No brochure is available for this product.

Need more information or assistance with this product?

Contact us on 1300 665 970 or complete an online enquiry and one of our staff members will get back to you as soon as possible.

SKU: A4377 • MPN: A4377

Product Reviews

More from this category